These double ended wrenches are designed to fit all Rearden adapters and muzzle devices:
- 1 1/32″ for the Atlas XL
- 1 1/16″ for the standard Atlas
- 13/16″ for Muzzle Device flats
- 1/8″ Thick to fit in the thinnest of places
They also include a 3/8″ drive cutout for use with an appropriate torque wrench.
They are made of 17-4PH Stainless and heat treated to H900.
To install your muzzle device, apply Rocksett and torque to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. If you are worried about the slipping or marring the finish on your muzzle device, use or make some shims to protect it. Brass shims are preferred but just about anything will work to ensure a perfect, non marring fit.
*Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned thoroughly and the muzzle device has been Rocksett to the barrel.*